How to Mount a Curved TV Safely and Securely
Mounting a curved TV takes a little more planning than mounting a flat-screen model because the screen’s shape affects viewing angle, wall clearance, and bracket fit.
This guide explains how to mount a curved TV, what tools you need, and the most important checks before you drill.
Curved televisions from Samsung, LG, Sony, TCL, and other brands can look stunning on the wall when they are installed correctly.
The key is matching the mount to the TV’s VESA pattern, weight, and curve so the setup feels stable and looks intentional.
What You Need Before You Start
Before you begin, gather the right equipment and confirm the TV’s mounting requirements in the user manual.
Most curved TVs use standard VESA mounting patterns, but the depth of the back panel and the curve can affect which mount works best.
- Curved TV and original stand removed
- Wall mount rated for your TV’s size and weight
- Stud finder
- Level
- Drill and drill bits
- Socket wrench or screwdriver
- Measuring tape
- Pencil or painter’s tape
- VESA-compatible screws and spacers
- Optional cable management kit
Check the TV’s weight, screen size, and VESA pattern before buying hardware.
If your television has a deeply curved rear panel, spacers may be necessary to prevent the mounting arms from pressing against the back of the set.
Choose the Right Wall Mount
The best mount for a curved TV depends on how close you want it to sit to the wall and how much viewing flexibility you need.
Fixed mounts keep the TV low-profile, tilting mounts improve viewing from below, and full-motion mounts let you angle the screen in different directions.
Fixed Mounts
Fixed mounts are best when the TV will be centered at eye level and you want a sleek, flush appearance.
They are also a good option for heavier curved TVs because they have fewer moving parts.
Tilt Mounts
Tilt mounts allow a downward angle, which can reduce glare and improve the picture if the TV is mounted above a fireplace or higher on the wall.
They are a practical choice for living rooms and bedrooms.
Full-Motion Mounts
Full-motion or articulating mounts provide the most flexibility, but they must be rated correctly for the TV’s size and weight.
For a curved TV, check that the arms can extend far enough to avoid rear-panel interference.
Look for mounts from reputable brands that list VESA compatibility clearly.
If you are unsure, match the mount to the exact TV model number and the manufacturer’s installation instructions.
Find the Best Wall Location
Wall placement affects both safety and picture quality.
Choose a location with strong framing, enough clearance for the curve of the TV, and a comfortable viewing height.
- Mount the TV near eye level when seated if possible
- Avoid direct sunlight that can cause glare
- Confirm that the wall can support the combined weight of the mount and TV
- Leave space for HDMI, power, and streaming device cables
Use a stud finder to locate at least one wall stud, and preferably two, depending on the width of the mount.
For drywall alone, do not rely on standard anchors unless the mount instructions explicitly allow it and the load is within limits.
How to Mount a Curved TV Step by Step
1. Measure and mark the mounting height
Hold the TV at the desired height with a helper, or measure from the floor to the center of the screen.
Mark the wall lightly so the center line aligns with your seating position.
2. Locate studs and mark pilot holes
Use a stud finder to identify the center of each stud.
Mark the bracket holes, then double-check the placement with a level to make sure the TV will not sit crooked.
3. Attach the wall plate
Drill pilot holes into the studs and secure the wall plate with the supplied lag bolts.
Tighten the hardware firmly, but do not overtighten and strip the wood.
4. Install the TV brackets
Attach the vertical mounting rails or arms to the back of the curved TV using the screws provided by the mount manufacturer.
If the back panel is curved or recessed, add the supplied spacers so the brackets sit evenly.
5. Lift and hang the TV
With a second person, lift the TV and hook it onto the wall plate.
Most mounts have a locking mechanism that prevents the TV from lifting off accidentally, so secure that mechanism after the set is in place.
6. Adjust and test
Check the level, tilt, and alignment before tightening the final adjustment screws.
If you are using a full-motion mount, test the range of motion slowly to make sure the TV does not strike the wall or nearby furniture.
Special Considerations for Curved TVs
Curved TVs have a deeper profile at the center and may sit farther from the wall than flat screens, especially when using full-motion brackets.
That extra depth can affect the visual symmetry of the installation, so measure carefully before drilling.
- Use spacers if the back of the TV is uneven
- Verify that the mount’s arms clear the curved panel
- Keep the screen centered to preserve the intended viewing experience
- Avoid twisting the chassis when tightening screws
If the TV appears to lean outward or does not sit level against the bracket, stop and recheck the hardware.
A mismatch between the mount and the curved back panel can cause stress on the television and weaken the installation.
Common Mistakes to Avoid
Most mounting problems come from rushing the measurements or choosing hardware that is not designed for the specific television model.
The following mistakes are especially common when learning how to mount a curved TV.
- Using a mount with the wrong VESA pattern
- Mounting into drywall without finding studs
- Ignoring the TV’s weight rating
- Skipping spacers when the back panel is curved
- Placing the TV too high above the seating area
- Leaving cables exposed or under tension
These errors can lead to poor viewing angles, visible gaps, or in the worst case, a failed installation.
Taking time to measure and verify each step is the safest approach.
Cable Management and Finishing Touches
Once the TV is mounted, organize the cables so the setup looks clean and remains easy to service.
Cable covers, in-wall kits, and raceways can hide HDMI and power lines while keeping them accessible.
- Label HDMI inputs for streaming devices, game consoles, and sound bars
- Leave enough slack to move a full-motion mount without strain
- Use surge protection for valuable home theater equipment
- Route cables away from heat sources and sharp edges
If you use a sound bar, check whether it should sit on the cabinet, wall, or directly beneath the curved TV.
Keep the bar centered so the audio and video stay visually aligned.
When to Hire a Professional
DIY installation works well for many homeowners, but a professional installer may be the better choice if the wall is masonry, the TV is very large, or the mount requires in-wall cable routing.
Professionals can also help with high placements, fireplace installs, and situations where electrical outlets are not conveniently located.
Hiring an expert can be especially useful if your curved TV is a premium OLED or QLED model and you want to avoid cosmetic damage to the frame or screen during installation.
In homes with plaster, brick, or tile walls, professional tools can make the job safer and more precise.