How to Install Govee LED Strip Behind TV
Installing a Govee LED strip behind a TV is one of the fastest ways to create a sharper, more immersive viewing setup.
The key is not just sticking the lights on the back panel, but placing them correctly so the glow looks even, not patchy or distracting.
This guide explains the full process, from choosing the right Govee kit to mounting, connecting, and tuning the lights for the best result.
What You Need Before You Start
Before learning how to install Govee LED strip behind TV, gather a few basics so the installation goes smoothly.
Most Govee TV light kits include the strip, control box, adhesive backing, and power adapter, but the exact parts vary by model.
- A Govee LED strip kit sized for your TV
- Clean microfiber cloth
- Isopropyl alcohol for surface prep
- Measuring tape
- Scissors, if your Govee model supports trimming
- Cable clips or zip ties for cable management
Check your TV size and back panel shape first.
Flat-backed TVs are easier to install, while curved, textured, or vent-heavy backs may require more careful planning.
Choose the Right Govee Strip for Your TV
Govee sells several LED strip and TV backlight options, including standard RGB strips, RGBIC strips, and camera-based TV backlights.
For a simple rear glow, a standard adhesive strip is enough.
For more dynamic color effects, RGBIC models can display multiple colors along one strip.
Match the kit to your TV’s diagonal size.
A strip that is too short will leave gaps, while one that is too long may bunch up and create uneven lighting.
Always review the product’s recommended TV range before buying.
Plan the Layout Before Peeling the Adhesive
The most important part of how to install Govee LED strip behind TV is placement.
The strip should sit around the outer edge of the back panel, usually a little inward from the edge so the LEDs face the wall cleanly.
Dry-fit the strip first without removing the adhesive.
This lets you visualize the route around the TV and avoid obstacles like vents, ports, speakers, or mounting brackets.
Many installations look best when the strip is placed in a continuous rectangle or U-shape around the back perimeter.
Where Should the Strip Go?
- Top edge: near the upper back panel for a strong halo effect
- Side edges: positioned evenly to balance the light spread
- Bottom edge: above the stand or mounting hardware, if possible
Avoid blocking ventilation openings.
TVs generate heat, and good airflow matters for long-term performance.
Clean the TV Back for Better Adhesion
Adhesive failure is one of the most common installation problems.
Govee strips stick best to surfaces that are dry, dust-free, and grease-free.
- Unplug the TV and move it slightly away from the wall if needed.
- Wipe the back panel with a dry microfiber cloth.
- Use a small amount of isopropyl alcohol on a cloth to remove residue.
- Let the surface dry completely before attaching the strip.
If your TV back is textured, the adhesive may not hold as well.
In that case, consider using additional cable clips or mounting aids approved for light strips.
Attach the Govee LED Strip Step by Step
Once the layout is planned and the surface is clean, you can install the strip.
Work slowly and press each section firmly as you go.
- Start at a corner or a point near the power input.
- Peel back a short section of the adhesive liner.
- Press the strip onto the TV back panel.
- Continue peeling and pressing a few inches at a time.
- Use gentle pressure along the full length to secure the bond.
Do not stretch the strip tightly around corners.
Keep the bends smooth so the LEDs and internal wiring stay intact.
If your Govee model includes clip guides or corner pieces, use them to make cleaner turns.
Should You Cut the Strip?
Only cut the strip if your specific Govee model is designed for trimming.
Cutting at the wrong point can damage the circuit and void the product’s usability.
Look for marked cut lines and follow the brand instructions exactly.
Connect the Power and Control Box
After the strip is mounted, connect it to the Govee control box and power supply.
Keep the box positioned where the cable can reach comfortably, often near the bottom or side of the TV.
For a tidy setup, route cables along the back edge and secure them with clips or ties.
Leave enough slack so the TV can move slightly without pulling on the strip or connector.
If your TV is wall-mounted, test cable routing before fully tightening any management clips.
A clean cable path makes the finished installation look more professional.
Pair the Lights With the Govee App
Most modern Govee lights are controlled through the Govee Home app, which is available for iOS and Android.
Once powered on, follow the app’s setup process to connect the device through Bluetooth or Wi-Fi, depending on the model.
Inside the app, you can adjust brightness, choose preset scenes, change colors, and create custom effects.
For TV use, lower brightness often looks better than maximum output because it reduces glare and keeps the image from feeling washed out.
Adjust the Lighting for the Best Effect
Even a perfect installation may need small adjustments.
Turn the lights on in a dark room and check the glow around the TV.
- If the top looks too dim, shift the strip slightly upward.
- If one side is brighter, recheck spacing and alignment.
- If the wall color changes the look, reduce brightness or switch to a warmer scene.
White or light-colored walls reflect light more evenly.
Dark walls create a more dramatic effect but may require stronger brightness settings.
Common Mistakes to Avoid
Knowing how to install Govee LED strip behind TV also means avoiding the errors that lead to poor results or early failure.
- Installing on a dusty or oily surface
- Placing the strip too close to vents
- Stretching the strip around corners
- Using the wrong strip length for the TV size
- Running cables where they can be pinched by a wall mount
- Setting brightness too high for normal viewing
These issues are easy to prevent and can make a big difference in how polished the final setup looks.
How to Make the Installation Last Longer
After installation, check the strip occasionally during the first few days.
Adhesive can loosen slightly as the TV warms up, especially on textured surfaces.
If needed, reinforce problem areas with additional mounting tape or clips designed for electronics.
Keep the TV back panel dust-free and avoid frequent tugging on the cables.
When moving the TV, support the strip and connectors instead of pulling from the cord.
When to Use a Govee TV Backlight Camera Kit
If you want lighting that matches the on-screen image, a Govee TV backlight camera kit may be a better option than a standard rear strip.
These systems use a camera to detect the colors on the screen and reflect them onto the wall in real time.
This type of setup takes a little more calibration, but it can create a more immersive gaming or movie experience than a simple static backlight.
Quick Setup Checklist
- Confirm your TV size matches the Govee kit
- Clean and dry the back panel
- Dry-fit the strip before sticking it
- Install without stretching the adhesive strip
- Connect the control box and power supply
- Pair the lights with the Govee app
- Test brightness and adjust placement if needed
With careful placement and a clean finish, a Govee LED strip can turn a standard television into a more immersive centerpiece without requiring complicated tools or advanced wiring.