Mounting a TV on brick takes more than a standard bracket. You need a mount that matches the wall, the TV’s weight, and the viewing angle you want.
Below, we’ve rounded up the best options for different screen sizes and setups, from low-profile tilting mounts to full-motion arms built for brick and masonry installations.
Best 10 TV Wall Mounts for Brick Walls Picks for 2026
Low-Profile Tilt Mount
Mounting Dream for 37-90 Inch TVs
- Supports up to 132 lbs and 37-90 inch TVs
- Low profile sits just 1.5 inches from the wall
- Tilts 8 degrees and fits 16, 18, 24 inch studs
Best For: Large TVs on brick or concrete walls when you want a slim tilting mount
Concrete Anchor Kit
12-Piece TV Mount Hardware Pack
- Includes 10x50mm and 10x60mm anchors
- Built for concrete, brick, and block masonry
- Virgin PP and serrated design improve grip
Best For: Masonry TV mount installs that need brick- and concrete-ready anchors
Full Motion Arm Mount
Mounting Dream for 32-70 Inch TVs
- Tilts, swivels, and extends for flexible viewing
- Supports TVs up to 99 lbs and 70 inches
- Includes template, hardware bags, and leveling adjustment
Best For: Solid-wall installs where you want full motion viewing control
Large-Screen Tilt Mount
ECHOGEAR for TVs Up to 90 Inches
- Supports TVs up to 90 inches and 135 lbs
- Tilts 10 degrees and levels after install
- Includes drilling template and pre-sorted hardware
Best For: Big-screen setups on solid walls that need a simple tilt mount
Heavy-Duty Full-Motion Choice
USX Mount Full Motion TV Wall Mount
- Fits most 42-90 inch TVs up to 132 lbs
- Full-motion design with tilt, swivel, and leveling
- Retracts to 2.40 inches from the wall
Best For: Large TVs needing strong articulation and proper brick or concrete anchoring
Single-Stud Compact Pick
Pipishell Full Motion TV Wall Mount
- Fits 26-65 inch TVs up to 77 lbs
- Compatible with brick, concrete, and wood stud walls
- Single-stud design helps in corners and tight spaces
Best For: Smaller TVs on brick walls where easy installation matters
Maximum Strength Upgrade
monTEK Heavy Duty Full Motion TV Wall Mount
- Supports 37-90 inch TVs up to 165 lbs
- 4X load tested with reinforced dual arms
- Compatible with brick, concrete, and 16-inch wood studs
Best For: Heavy TVs on brick walls where maximum strength is the priority
Best All-Around Fit
Full Motion TV Mount for 37"-84" TVs
- Fits 37"-84" TVs up to 132 lbs.
- Tilts, swivels, and levels after install.
- Extends 15.02" and retracts to 2.62".
Best For: Large TVs that need flexible positioning and broad compatibility.
Most Robust Option
UL Listed Full Motion Mount for 42"-90" TVs
- Supports brick, concrete, and stud installs.
- UL-listed and tested for long-term durability.
- Holds TVs up to 132 lbs with smooth motion.
Best For: Large-screen owners who want brick-wall compatibility and maximum stability.
Compact Heavy-Duty Pick
Full Motion TV Mount for 32"-70" TVs
- Works on brick, concrete, and stud walls.
- Supports TVs up to 99 lbs.
- Offers tilt, swivel, and 13.89" extension.
Best For: Mid-size TVs that need an easier brick-wall mounting solution.
Low-Profile Tilt Mount – Mounting Dream for 37-90 Inch TVs
If you’re comparing tv wall mounts for brick walls, this Mounting Dream tilt mount is a practical option as long as you pair it with the proper concrete hardware. It supports larger TVs, sits close to the wall, and gives you a modest tilt to help manage glare without adding much bulk.
Best For: Large TVs where a slim, tilting mount and brick or concrete-compatible anchors are needed.
Pros:
- Supports 37-90 inch TVs up to 132 lbs.
- Low-profile design keeps the TV just 1.5 inches from the wall.
- Tilts up to 8 degrees to reduce glare.
- Works with 16, 18, and 24 inch studs.
Cons:
- Not suitable for drywall-only installation.
- Concrete anchors may need to be requested separately.
Overall, this is a clean, space-saving choice for buyers who want a straightforward tilt mount and can confirm their wall type and hardware requirements first.
Concrete Anchor Kit – 12-Piece TV Mount Hardware Pack
For tv wall mounts for brick walls, the mount itself is only part of the job; the right anchors matter too. This 12-piece kit is built for solid masonry and gives you two common anchor sizes for TV brackets, shelving, and other heavy installations.
Best For: Replacing or upgrading masonry anchors for TV mounts, shelving, and other solid-wall projects.
Pros:
- Includes 10x50mm and 10x60mm anchors in a 12-piece set.
- Designed for concrete, brick, and block masonry.
- Made from 100% virgin polypropylene for added toughness.
- Uses a serrated anti-slip design for stronger grip and pull-out resistance.
Cons:
- Hardware only; it is not a complete TV mount.
- Requires a 10mm masonry drill bit for installation.
This is a sensible add-on if your wall-mount install needs dependable brick-compatible anchors and you want common sizes without hunting through a hardware store.
Full Motion Arm Mount – Mounting Dream for 32-70 Inch TVs
If you want tv wall mounts for brick walls with more viewing flexibility, this full-motion Mounting Dream bracket is built for TVs that need tilt and swivel adjustability. It works best with the proper concrete anchors and is aimed at buyers who want to pull the screen out, angle it, and then tuck it back in again.
Best For: Viewers who want an articulated mount for larger rooms and adjustable sightlines on solid walls.
Pros:
- Supports 32-70 inch TVs up to 99 lbs.
- Full-motion arms let you tilt, swivel, and extend the TV.
- Pulls out to 17.5 inches and retracts to 3.4 inches.
- Includes a paper template and post-install leveling adjustment.
Cons:
- Not for drywall installation.
- Concrete anchors are available separately upon request.
It’s a strong choice if you want a more adjustable setup than a basic tilt mount, but you should plan for the correct masonry hardware before installation.
Large-Screen Tilt Mount – ECHOGEAR for TVs Up to 90 Inches
When shopping for tv wall mounts for brick walls, this ECHOGEAR tilt mount stands out for big-screen support and simple installation. It’s designed to sit low, tilt enough to cut glare, and make post-install leveling easier if your first pass isn’t perfect.
Best For: Large TVs on solid walls when you want a straightforward low-profile tilt mount.
Pros:
- Supports TVs up to 90 inches and 135 lbs.
- Tilts up to 10 degrees for glare reduction.
- Includes a drilling template and pre-divided hardware.
- Offers 5 degrees of post-install leveling adjustment.
Cons:
- Tilt only, so it does not provide swivel or extension.
- Best results depend on correct wall hardware for masonry installs.
For buyers who want a sturdy, uncomplicated mount for a very large TV, this is a strong pick with practical installation help and enough adjustability for everyday viewing.
Heavy-Duty Full-Motion Choice – USX Mount Full Motion TV Wall Mount
If you want tv wall mounts for brick walls that can handle a larger screen, this USX Mount model is built for flexibility and weight support. It fits most 42-90 inch TVs, supports up to 132 lbs, and includes full-motion adjustment for dialing in a better viewing angle in living rooms, game rooms, or media spaces.
Best For: Larger TVs where you need a strong, adjustable mount and have either wood studs or a proper concrete/brick anchoring setup.
Pros:
- Supports 42-90 inch TVs up to 132 lbs.
- Dual articulating arms offer +5°/-15° tilt and up to 45° swivel.
- Retracts to 2.40 inches from the wall for a cleaner look.
- Includes cable ties, bubble level, and standard mounting hardware.
Cons:
- Concrete anchors are not included by default.
- Maximum swivel depends on your TV size and layout.
This is a strong pick if you want a full-motion mount with a wide size range and space-saving profile. Just make sure you have the right wall hardware for brick installation before you buy.
Single-Stud Compact Pick – Pipishell Full Motion TV Wall Mount
Among tv wall mounts for brick walls, this Pipishell option stands out for smaller TVs and easier placement. It supports 26-65 inch screens, works with brick, concrete, and wood stud mounting, and uses a single-stud design that can simplify installs in corners or tighter spaces.
Best For: Smaller to mid-size TVs where you want a compact full-motion mount and straightforward brick-wall compatibility.
Pros:
- Compatible with brick, concrete, and wood stud walls.
- Supports 26-65 inch TVs up to 77 lbs.
- Single-stud design can make installation easier in tight spots.
- Offers +5°/-15° tilt, +/-90° swivel, and +/-4° leveling.
Cons:
- Not intended for drywall alone.
- Lower weight and size capacity than heavier-duty models.
This is a practical choice when you need flexibility without overbuilding the mount. It is especially appealing if you are mounting on brick and want a simpler setup for a medium or smaller TV.
Maximum Strength Upgrade – monTEK Heavy Duty Full Motion TV Wall Mount
If you are comparing tv wall mounts for brick walls and need higher capacity, this monTEK mount is the most heavy-duty option in the group. It supports 37-90 inch TVs up to 165 lbs, is 4X load tested, and is designed for use on 16-inch wood studs, solid concrete, or brick walls.
Best For: Larger and heavier TVs that need extra strength, wide compatibility, and a more premium full-motion setup.
Pros:
- Supports TVs from 37-90 inches and up to 165 lbs.
- 4X load tested with reinforced dual arms for added stability.
- Works with brick, concrete, and 16-inch wood stud walls.
- Includes tool-free tilt, 60° swivel, and +/-3° leveling.
Cons:
- Not for drywall installation alone.
- May be more mount than you need for smaller TVs.
For a brick-wall install with a big TV, this model is built for confidence and adjustability. Its higher weight rating and reinforced arms make it the strongest fit when stability is the priority.
Best All-Around Fit – Full Motion TV Mount for 37"-84" TVs
If you need one of the more versatile tv wall mounts for brick walls, this USX MOUNT model is built to cover a wide range of screen sizes while keeping the TV easy to adjust after installation. It supports full-motion positioning, so it works well when you want to fine-tune glare, viewing height, or seating angles in a family room or den.
Best For: Buyers who want a heavy-duty, flexible mount for larger TVs and may also need compatibility with wood studs or concrete installation.
Pros:
- Fits most 37″-84″ TVs with VESA patterns up to 600x400mm.
- Dual articulating arms provide tilt, swivel, and post-install leveling.
- Extends 15.02″ and retracts to 2.62″ for better space savings.
- Includes a bubble level, cable ties, and labeled hardware bags.
Cons:
- Concrete anchors are not included in the package.
- Designed for 12″-16″ wood studs, so wall compatibility should be checked carefully.
Overall, this is a practical pick if you want a durable full-motion mount with broad TV compatibility and the support to help with missing parts or brick/concrete installation needs.
Most Robust Option – UL Listed Full Motion Mount for 42"-90" TVs
For shoppers comparing tv wall mounts for brick walls, this Perlegear model stands out because it explicitly supports brick along with concrete and wood-stud installs. It is aimed at larger TVs and adds a heavy-duty structure, smooth motion, and a low-profile retracted position for a cleaner setup.
Best For: Owners of larger TVs who want a UL-listed, heavy-duty full-motion mount with brick-wall support.
Pros:
- Supports 42″-90″ TVs and VESA patterns up to 600x400mm.
- Can be installed on concrete and brick walls, plus 8″, 12″, or 16″ studs.
- UL-listed design is tested for 60,000 motion cycles and 4x the rated load.
- Tool-free tilt, smooth swivel, and +/-3 b0 post-install leveling.
Cons:
- Not suitable for all stud spacings without checking extension-bracket options.
- Heavier, full-featured design may be more than needed for smaller TVs.
This is a strong choice if stability and brick-wall compatibility are top priorities, especially for a big-screen setup where you want easy adjustment without sacrificing strength.
Compact Heavy-Duty Pick – Full Motion TV Mount for 32"-70" TVs
If you want a straightforward option among tv wall mounts for brick walls, this USX MOUNT bracket offers broad compatibility in a smaller, lighter package than many larger full-motion models. It supports brick, concrete, and standard stud mounting, making it a practical fit for mid-size TVs in bedrooms, offices, or living rooms.
Best For: Buyers with 32″-70″ TVs who want a simpler full-motion mount for brick or concrete walls.
Pros:
- Fits most 32″-70″ TVs up to 99 lbs.
- Compatible with 12″/16″ wood studs, concrete, and brick walls.
- Dual articulating arms allow tilt, swivel, and 13.89″ extension.
- Includes US-based support for missing parts and concrete-anchor help.
Cons:
- Lower max weight rating than some larger heavy-duty mounts.
- VESA range tops out at 400x400mm, so it is not for every big-screen TV.
For a mid-size TV, this is a sensible balance of flexibility, installation support, and wall-type compatibility without moving into oversized mount territory.
How We Picked the Best TV Wall Mounts for Brick Walls
We focused on mounts that make brick installation more practical and secure: high weight ratings, broad VESA compatibility, clear hardware or template support, and designs suited to masonry anchoring. We also looked for real-world features that matter on brick walls, such as tilt range, extension, and sturdy articulating arms.
Because brick walls can be less forgiving than stud-and-drywall installs, we favored mounts that support careful leveling, solid locking mechanisms, and installation guidance that helps reduce guesswork.
Quick Comparison
If you want the simplest, lowest-profile look, a tilting mount is usually the best fit. If your TV sits off-center, reflects light, or needs to swing toward a seating area, a full-motion model gives you more flexibility. For heavier large-screen TVs, prioritize a higher load rating and stronger arm construction over maximum extension.
Key Buying Factors for TV Wall Mounts for Brick Walls
Load Capacity and TV Size
Always check both the listed TV size range and the maximum weight rating. Brick is strong, but the mount and anchors still need to handle the load safely. Leave margin instead of choosing a mount that only just meets your TV’s weight.
Masonry-Friendly Installation
For TV Wall Mounts for Brick Walls, installation hardware matters as much as the bracket itself. Look for mounts that include drilling templates, clear instructions, and compatibility with concrete or masonry anchors. If anchors are not included, make sure the required hardware matches your wall and bolt size.
Mount Style
Tilt mounts are best for reducing glare and keeping the TV close to the wall. Full-motion mounts are better when you want swivel, side-to-side adjustment, or easier access to ports. On brick, shorter-profile options may feel simpler and more secure, while articulating arms require careful anchoring.
VESA Pattern and Stud/Mounting Width
Confirm that the mount supports your TV’s VESA pattern. Also check the wall attachment width and bracket span, especially if the mount needs a wider footprint for stability. A correct VESA match prevents awkward positioning and poor fit.
Who Should Buy Which TV Wall Mounts for Brick Walls?
If you want a clean, fixed-looking installation, choose a tilting or low-profile mount. If you share the room with multiple viewing spots, a full-motion arm is worth it. If you own a larger TV, go with a heavy-duty model that prioritizes strength and smooth motion over compact size.
For most buyers comparing TV Wall Mounts for Brick Walls, the right choice comes down to three questions: how heavy is the TV, how much motion do you need, and how straightforward do you want the install to be.